PRINCESS 40M

The 40M clearly demonstrates the ability of Princess Yachts to build some of the most technically advanced superyachts and this was acknowledged by the 40M winning the prestigious World Superyacht Award.

The quality is evident throughout the yacht. Sound and vibration is minimised and the resin infused hull means the yacht is much lighter than one would expect for a boat of this magnitude.

The deck spaces and superbly insulated and thoroughly planned out. The accommodation is sumptuous throughout with a five cabin layout for up to 12 guests to live aboard in complete luxury. There is also space for seven crew to live comfortably and in complete privacy. A large main deck galley and expansive views via the hull windows reveal the attention to detail which has been afforded to the design of the yacht. The aft garage can house a Jet Ski and a custom designed 6.5m Rib. The whole aft area doubles up as a huge guest relaxation area right on the water.

" A yacht built to a standard that would put
many more expensive yachts to shame. "

Boat International, October 2012


Length 40.16 m (131′ 9″)
Beam 8.02 m (26′ 4″)
Depth 2.29 m (7′ 6″)
Displacement* 235 T
Gross tonnage 395 GT
Fuel capacity 29345 L
Water capacity 5000 L
Hot water calorifiers 615 L
Grey water tank 2000 L
Black water tank 1400 L


GUESTS
10 persons (5 cabin layout)
12 persons (6 cabin layout) – optional

CREW
7 persons, comprising::
1 x captain’s cabin on upper deck
6 x crew in 3 cabins on lower deck


MTU 12V 4000 M93L with ZF7650A @3.286:1 gearbox 2 x 3,508mhp @ 2,100 rpm
† Maximum speed 21-23 kn
† Range up to 2100 nm

MTU 12V 4000 M73L with ZF7650A @3.286:1 Gearbox 2 x 2,938mhp @ 2,050 rpm
† Maximum speed 20-22 kn
† Range up to 2050 nm


NAVAL ARCHITECT / EXTERIOR STYLING
Bernard Olesinski / Princess Yachts International

CLASSIFICATION
RINA Commersial
MCA LY3 Unrestricted

HULL AND SUPERSTRUCTURE
Resin Infused Composite


Propellers: 2 x 5 blade VEEMStar-LC
Generators: 2 x MDDCH 80kW Onan (50Hz) QD
Bow thruster: ABT TRAC 100hp
Stern thruster: ABT TRAC 100hp
Stabilisers: ABT TRAC (Fin Type – Zero Speed) – optional

Please contact us for more information.

* Displacements are calculated with half full fuel and water but with no optional equipment fitted or other gear or crew aboard.

† Maximum speeds will vary depending on cleanliness of hull, condition of sterngear, loading of craft, water and air temperatures, sea conditions and other factors. Speed estimates are therefore given in good faith but without warranty or liability on the part of us or Princess Yachts International plc.

Crafts illustrated on this website may be fitted with certain optional equipment. Specifications may be changed at any time without notice or liability.

VIDEOS & PHOTOS


RECOMMENDED ACCESSORIES

[mapsmarker layer="1"]

Contact us

We look forward to get in touch with You!